Alco APF 2 size monitors are the lightweight members of the Alco monitor family. The small size combined with compact dimensions allows, depending on the version, a space saving installation or space saving storage. Due to their low weight, they are very flexible in use and allow their user to easily transport them to the site of operation or mount them on weak structural elements. Due to various nozzles and accessories these small monitors allow a wide range of applications. The listed basic model is without inlet flange. A corresponding flange can be made in the listed accessories. The horizontal swivelling range can be increased to up to 360°, depending on the configuration and after prior consultation.

ALCO APF 2.5 size monitors convince with their compact size and high performance. Whether permanently installed or portable, the size 2.5 monitors offer their users a wide range of tactical options. The large number of accessories and nozzles allow the user the maximum flexibility in the application. The ALCO PowerFighter 2.5-DC has a compact build. In-cast vanes and by advanced computer aided design optimized water flow result in low friction loss and maximum reach. The application of this versatile monitor ranges from mounting as a bumper monitor, roof monitor to an in-rescue cage monitor of aerial ladders. The listed basic model is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made in the listed accessories. The horizontal swivelling range can be increased to up to 360°, depending on the configuration and after prior consultation.

Alco monitors in the APF 3 size are true all-rounders. They show their strengths in the industrial and marine sectors as well as in the fire service sector. Depending on requirements and design, these monitors can be used in a portable version or as a permanently installed variant. A large selection of nozzles and accessories enables maximum flexibility in use. The APF 3C size impresses with its flexibility in terms of both the drive types and the pipe/nozzle equipment. The models in this size can be used as water, foam and powder monitors with a throughput of up to 4,000 l/min at 8 bar. Due to the compact shape of the base body in relation to the inner diameter of the water supply, they are particularly suitable for areas of application with limited space. The basic model listed is listed without a nozzle and inlet flange. A corresponding flange and nozzle configuration can be made using the accessories listed. The horizontal swivel range can be increased to up to 360° depending on the configuration and after consultation.

Alco APF 3 size monitors are true all-rounders. They show their strengths in the industrial and marine sector as well as in the firefighting sector. Depending on your requirements and design, these monitors are used in portable or fixed versions. A large selection of nozzles and accessories allows maximum flexibility in application. The models of size APF 3-U are genuine all-rounders, both in regards to the operating options as well as the equipment with tubes/nozzles. These monitors excel in the especially low overall height of the basic unit relative to the water guide inner diameter and can be used as water, foam and powder monitor with a flow rate of up to 4,000 lpm at 8 bar (extinguishing powder 50 kg/s) depending on equipment. They are equipped with ball bearing mounted swivel joints that can be greased via lubricating nipples. Electric models can be optionally equipped with continuously adjustable limit switches, potentiometers or position sensors. The standard vertical swivelling angle can be adapted to your actual requirements whilst maintaining the entire swivelling range. The listed basic model is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made in the listed accessories. The horizontal swivelling range can be increased to up to 360°, depending on the configuration and after prior consultation.

Due to their versatility, Alco monitors of size APF 4 can be used on vehicles or ships, as well as in industrial plants. This versatility is also reflected in the accessories. A large selection of drive options and nozzles enable almost any application. The models of size APF 4U are the continuation of the APF 3U series and are therefore the all-rounders of size APF 4. This applies to the types of actuation, the pipe and nozzle equipment, and the intended use. They can be used on vehicles or ships, as well as in industrial plants, also in conjunction with remote control from monitoring centers. They are characterized by the particularly low height of the basic unit in relation to the inner diameter of the water supply and, depending on the equipment, can be used as a water or foam monitor with a throughput of up to 6,000 l/min at 8 bar. They are equipped with ball-bearing swivel joints, which can be regreased via grease nipples. The basic model listed is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made using the accessories listed. The horizontal swivel range can be increased to up to 360° depending on the configuration and after consultation.

Alco monitors of the APF 5 size are convincing in their function as vehicle monitors. Due to the special design in combination with a corresponding nozzle, these monitors meet the required ICAO regulations and are mainly used on airfield fire fighting vehicles. Size APF 5 monitors were specially developed for use as roof monitors on vehicles. The body of the APF5 is characterized by a very low overall height in relation to the internal diameter of the waterway. This makes it ideally suited as a roof monitor for airfield fire extinguishing vehicles. The monitors are used as water of foam monitors with a throughput capacity of up to 8.000 lpm at 8 bar. The water way is hydraulically optimized flow guide ribs, which leads to low pressure losses and permits large throwing widths. The listed basic model is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made in the listed accessories. The horizontal swivelling range can be increased to up to 360°, depending on the configuration and after prior consultation.

Alco APF 6 size monitors are suitable for use as vehicle monitors, as monitors for industrial applications and for installation on trailers. Due to the different possibilities of operation or drives these monitors can be used almost everywhere. Due to a large selection of nozzles the monitor can be used for water as well as foam dispensing. Size APF 6 models can be used on vehicles and in industrial installations depending on material, operating mode and nozzle. The monitors can be used as a water or foam monitor having a throughput capacity of up to 16.000 lpm at 8 bar. Despite the variety, the essential properties remain the same for all models. For example, ball bearing mounted swivel joints are used exclusively. Worm gears, spindles and gear units are covered and thus impervious to dirt. The listed basic model is shown without nozzle. A corresponding nozzle configuration can be made in the listed accessories. The horizontal swivelling range can be increased to up to 360°, depending on the configuration and after prior consultation.

ALCO APF 8 size monitors are specially designed for use on ships and in industrial plants. The installation on large tankers or trailers enables especially industrial fires to be fought effectively. The APF 8 models are suitable for use on ships in combination with FiFi-2 systems. Size APF 8 monitors are specially designed for use on ships and in industrial installations and industrial fire truck. Electric operated and combined with a remote control this monitor is a perfect choice to throw a huge quantity water on a fire. Size APF 8 monitors can be used as a water or foam monitor with a throughput capacity of up to 40,000 l/min at 8 bar. The APF 8 size models are suitable for use in connection with FiFi-2-systems. The listed basic model is shown without nozzle. A corresponding nozzle configuration can be made in the listed accessories. The horizontal swivelling range can be increased to up to 360°, depending on the configuration and after prior consultation.

Size 1 monitors are the most compact and lightest monitors in the ALCO product family. The small size combined with compact dimensions allows a space-saving installation or storage. Due to their low weight they are very flexible in use and allow their user to mount them on weak structural elements. Due to various nozzles and accessories these small monitors allow a wide range of applications. The APF 1 whilst very compact features a robust design, making it the ideal bumper monitor. The flow guide vanes and optimised water routing ensure minimal pressure losses whilst maintaining a large throwing range when discharging water or water/foam mixtures. Due to the closed engine area, this monitor is particularly insensitive to contamination and environmental influences. To not exceed the weight limits of the new generation vehicles, special attention was provided utilising new aluminium alloys and composite materials, ensuring a low weight. Equipped with a MZV nozzle, adjustable in both flow rate and jet shape, the APF 1 is the ideal front monitor for wildland firefighting vehicles or smaller firefighting vehicles. The listed basic model is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made in the listed accessories. The horizontal swivelling range can be increased to up to 360°, depending on the configuration and after prior consultation.