APF 2.5C
Alco APF 2.5 size monitors convince with their compact size and high performance. Whether permanently installed or portable, the size 2.5 monitors offer their users a wide range of tactical options. The large number of accessories and nozzles allow the user the maximum flexibility in the application. Models of size APF 2.5-C are suitable for use as roof monitor on vehicles, as fixed unit in industrial installations or as portable monitor for mobile use. The APF 2.5-C base body excels in very low installation space when in deployment position. It is suitable as water, foam and powder monitor having a flow rate of up to 2,500 lpm at 8 bar (extinguishing powder 25 kg/s). The APF 2.5-C units are equipped with regreasable swivel joints. Simple and ergonomic operation is ensured by an adjustable hand lever. In addition, clamping screws allow monitor interlocking in a certain position. In mobile use, the device can be mounted without tools onto a base support in no time. The monitor can be brought into a stretched position allowing space-saving accommodation in the vehicle. The listed basic model is shown without nozzle. A corresponding nozzle configuration can be made in the listed accessories.
APF 3C EVO
Alco APF 3 size monitors are true all-rounders. They show their strengths in the industrial and marine sector as well as in the firefighting sector. Depending on your requirements and design, these monitors are used in portable or fixed versions. A large selection of nozzles and accessories allows maximum flexibility in application. The APC 3-C size captivates by its flexibility both in regards to the drive systems and the pipe/ nozzle equipment. The models of this size can be used as water, foam and powder monitor with a flow rate of up to 4,000 lpm at 8 bar (extinguishing powder 50 kg/s). Due to the compact design of the base body in relation to the water guide inner diameter, they are especially suitable for tight application areas. The listed basic model is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made in the listed accessories.
APF 3P
ALCO APF 3 size monitors are true all-rounders. They show their strengths in the industrial and marine sector as well as in the firefighting sector. Depending on your requirements and design, these monitors are used in portable or fixed versions. A large selection of nozzles and accessories allows maximum flexibility in application. The APF 3-P is designed as a portable monitor for mobile use. The device equipped with nozzle or foam pipe is suitable for delivering water and any type of foam. The monitor resilient supporting legs have low-wear carbide stand tips and collapse for transport in just one action. Vertical adjustment is carried out via a self-locking spindle with hand wheel. Moreover, a built-in swivel range limit ensures stability at all times of use. The top and bottom sections of the monitor can be quickly and simply separated from each other without tools. On the one hand, this provides convenient handling combined with handles integrated in the top and bottom section. On the other hand, the modular design allows the use of the top section as a roof monitor by mounting it onto a suitable folding joint or roof flange. Furthermore, it can be operated using a single hose line thanks to the integrated collecting breeching with non-return valves at the monitor input. The listed basic model is without nozzle and input coupling. A corresponding coupling and nozzle configuration can be made in the listed accessories.
APF 3U HR
Alco monitors in size APF 3 are true all-rounders. They show their strengths in the industrial and marine sectors as well as in the fire service sector. Depending on requirements and design, these monitors are used in the portable version or as a permanently installed variant. A large selection of nozzles and accessories enables maximum flexibility in use. The models in size APF 3U are real all-rounders, both in terms of the types of operation and the pipe/nozzle equipment. These monitors are characterized by the particularly low height of the basic unit in relation to the inner diameter of the water supply and, depending on the equipment, can be used as water, foam and powder monitors with a throughput of up to 4,000 l/min at 8 bar (extinguishing powder 50 kg/s). They are equipped with ball-bearing swivel joints, which can be regreased via grease nipples. An integrated weight compensation ensures that the vertical swivel movement can be operated with minimal effort. The basic model listed is without a nozzle and inlet flange. A corresponding flange and nozzle configuration can be made using the accessories listed.
APF 4U HR
Alco APF 4 size monitors can be used on vehicles or ships, as well as in industrial plants, due to their versatility. This versatility is also reflected in the accessories. A large selection of drive options and nozzles allows almost any application. Size APF 4-U models are the continuation of the APF 3-U series and thus the all-rounder of size APF 4. This applies for the operation options, the pipe/ nozzle equipment, as well as the specific applications. They can be used on vehicles or ships, as well as in industrial installations, even by remote control from control centres. They excel in particularly low overall height of the basic unit relative to the water guide inner diameter and can be used as a water or foam monitor with a flow rate of up to 6,000 lpm at 8 bar depending on the equipment. They are equipped with ball bearing mounted swivel joints that can be greased via lubricating nipples. The listed basic model is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made in the listed accessories.
APF 6U HR
Alco APF 6 size monitors are suitable for use as vehicle monitors, as monitors for industrial applications and for installation on trailers. Due to the different possibilities of operation or drives these monitors can be used almost everywhere. Due to a large selection of nozzles the monitor can be used for water as well as foam dispensing. Size APF 6 models can be used on vehicles and in industrial installations depending on material, operating mode and nozzle. The monitors can be used as a water or foam monitor having a flow rate of up to 16,000 lpm at 8 bar. Despite the variety, the essential properties remain the same for all models. For example, ball bearing mounted swivel joints are used exclusively. Worm gears, spindles and gear units are covered and thus impervious to dirt. The listed basic model is shown without nozzle. A corresponding nozzle configuration can be made in the listed accessories.
APF 8 HR
Alco APF 8 size monitors are specially designed for use on ships and in industrial plants. The installation on large tankers or trailers enables especially industrial fires to be fought effectively. The APF 8 models are suitable for use on ships in combination with FiFi-2 systems. Size APF 8 monitors are specially designed for use on ships and in industrial installations and industrial fire truck. Electric operated and combined with a remote control this monitor is a perfect choice to throw a huge quantity water on a fire. Size APF 8 monitors can be used as a water or foam monitor with a throughput capacity of up to 40,000 l/min at 8 bar. The APF 8 size models are suitable for use in connection with FiFi-2-systems. The listed basic model is shown without nozzle. A corresponding nozzle configuration can be made in the listed accessories.