.png){kind=logo}
Folding Joint DN80-DN80
Select your desired configuration:
Folding joints are used to fold monitors from the working position to a rest position for transport or storage and are mainly used on vehicles, but also in industrial plants. Folding joints are designed to fold down monitors from the fire-fighting position to an idle position to enable them to be transported or stored away. Although they are used primarily on vehicles, they are also used in industrial facilities such as waste incineration plants. Used on vehicles they allow monitors to be permanently installed without increasing the overall height of the vehicle. When swung out during assignments, the raised position of the monitor provides a much greater vertical swivel range downwards while also making it possible to operate effortlessly. The joint is secured, with positive locking and vibration resistance, by a spring-loaded lock in both the set up position and the folded down position. Folding joints are used in industrial facilities for moving monitors from their working positions to an idle position. This is particularly important in incineration plants, because monitors are then protected from the grippers on the waste crane, from projecting objects and also from heavy pollution. To avoid damages, the folding joints should not swing freely during transport. When folded down, they must be picked up at a point on the superstructure roof. The maximum allowd flow rate of 3000 l/min must be respected.
Product number:
10522034
| Product number: | 10522034 |
|---|---|
| Length: | 305 mm |
| Width: | 330 mm |
| Height: | 790 mm |
| Weight: | 15 kg |
| Flow rate at reference pressure p1: | 3000 |
| Inlet: | Flansch DN80 |
| Material Adapter: | Aluminium |
| Outlet: | Flansch DN 80 |
| Reference pressure p1 [bar]: | 8 |
| Sealing: | NBR |
| max. permissible operating pressure [bar]: | 16 |