Engineered for firefighters who demand speed, strength and simplicity, the TerraStream3 ground monitor redefines operational excellence in modern firefighting. Unmatched Performance Where It Matters Most Delivering 5,000 L/min flow with industry-leading 1.1 bar friction loss (36% more efficient than competitors), TerraStream3 combines military-grade durability with groundbreaking ease of use. Key AdvantagesLightest in Class – 30% lighter than comparable monitors (just 7.3 kg lift-off weight)One-Person Deployment – Patented quick-connect system and synchronized legs enable full setup in under 60 secondsDual Deployment Flexibility – Seamlessly transitions between portable ground base and truck-mounted configurationsBattle-Tested Reliability – Anodized aluminum construction with stands extreme conditions while resisting corrosion360° horizontal rotation (truck mount) / 180°(portable) for superior maneuverabilityLow-profile design maintains stability even at maximum flow ratesIntuitive controls reduce training time and operator stressSpecificationsFlow Rates: Up to 5,000 L/minPressure Loss: Just 2.5 bar (36 psi) at 5000 L/minMaterials: Aerospace-grade aluminum with powder coatingCompliance: Meets DIN EN 15767

Size 1 monitors are the most compact and lightest monitors in the ALCO product family. The small size combined with compact dimensions allows a space-saving installation or storage. Due to their low weight they are very flexible in use and allow their user to mount them on weak structural elements. Due to various nozzles and accessories these small monitors allow a wide range of applications. The APF 1 whilst very compact features a robust design, making it the ideal bumper monitor. The flow guide vanes and optimised water routing ensure minimal pressure losses whilst maintaining a large throwing range when discharging water or water/foam mixtures. Due to the closed engine area, this monitor is particularly insensitive to contamination and environmental influences. To not exceed the weight limits of the new generation vehicles, special attention was provided utilising new aluminium alloys and composite materials, ensuring a low weight. Equipped with a MZV nozzle, adjustable in both flow rate and jet shape, the APF 1 is the ideal front monitor for wildland firefighting vehicles or smaller firefighting vehicles. The listed basic model is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made in the listed accessories. The horizontal swivelling range can be increased to up to 360°, depending on the configuration and after prior consultation.

ALCO APF 2.5 size monitors convince with their compact size and high performance. Whether permanently installed or portable, the size 2.5 monitors offer their users a wide range of tactical options. The large number of accessories and nozzles allow the user the maximum flexibility in the application. The ALCO PowerFighter 2.5-DC has a compact build. In-cast vanes and by advanced computer aided design optimized water flow result in low friction loss and maximum reach. The application of this versatile monitor ranges from mounting as a bumper monitor, roof monitor to an in-rescue cage monitor of aerial ladders. The listed basic model is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made in the listed accessories. The horizontal swivelling range can be increased to up to 360°, depending on the configuration and after prior consultation.

Alco APF 2 size monitors are the lightweight members of the Alco monitor family. The small size combined with compact dimensions allows, depending on the version, a space saving installation or space saving storage. Due to their low weight, they are very flexible in use and allow their user to easily transport them to the site of operation or mount them on weak structural elements. Due to various nozzles and accessories these small monitors allow a wide range of applications. The listed basic model is without inlet flange. A corresponding flange can be made in the listed accessories. The horizontal swivelling range can be increased to up to 360°, depending on the configuration and after prior consultation.

Alco monitors in the APF 3 size are true all-rounders. They show their strengths in the industrial and marine sectors as well as in the fire service sector. Depending on requirements and design, these monitors can be used in a portable version or as a permanently installed variant. A large selection of nozzles and accessories enables maximum flexibility in use. The APF 3C size impresses with its flexibility in terms of both the drive types and the pipe/nozzle equipment. The models in this size can be used as water, foam and powder monitors with a throughput of up to 4,000 l/min at 8 bar. Due to the compact shape of the base body in relation to the inner diameter of the water supply, they are particularly suitable for areas of application with limited space. The basic model listed is listed without a nozzle and inlet flange. A corresponding flange and nozzle configuration can be made using the accessories listed. The horizontal swivel range can be increased to up to 360° depending on the configuration and after consultation.

Alco APF 3 size monitors are true all-rounders. They show their strengths in the industrial and marine sector as well as in the firefighting sector. Depending on your requirements and design, these monitors are used in portable or fixed versions. A large selection of nozzles and accessories allows maximum flexibility in application. The models of size APF 3-U are genuine all-rounders, both in regards to the operating options as well as the equipment with tubes/nozzles. These monitors excel in the especially low overall height of the basic unit relative to the water guide inner diameter and can be used as water, foam and powder monitor with a flow rate of up to 4,000 lpm at 8 bar (extinguishing powder 50 kg/s) depending on equipment. They are equipped with ball bearing mounted swivel joints that can be greased via lubricating nipples. Electric models can be optionally equipped with continuously adjustable limit switches, potentiometers or position sensors. The standard vertical swivelling angle can be adapted to your actual requirements whilst maintaining the entire swivelling range. The listed basic model is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made in the listed accessories. The horizontal swivelling range can be increased to up to 360°, depending on the configuration and after prior consultation.

Due to their versatility, Alco monitors of size APF 4 can be used on vehicles or ships, as well as in industrial plants. This versatility is also reflected in the accessories. A large selection of drive options and nozzles enable almost any application. The models of size APF 4U are the continuation of the APF 3U series and are therefore the all-rounders of size APF 4. This applies to the types of actuation, the pipe and nozzle equipment, and the intended use. They can be used on vehicles or ships, as well as in industrial plants, also in conjunction with remote control from monitoring centers. They are characterized by the particularly low height of the basic unit in relation to the inner diameter of the water supply and, depending on the equipment, can be used as a water or foam monitor with a throughput of up to 6,000 l/min at 8 bar. They are equipped with ball-bearing swivel joints, which can be regreased via grease nipples. The basic model listed is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made using the accessories listed. The horizontal swivel range can be increased to up to 360° depending on the configuration and after consultation.

Alco monitors of the APF 5 size are convincing in their function as vehicle monitors. Due to the special design in combination with a corresponding nozzle, these monitors meet the required ICAO regulations and are mainly used on airfield fire fighting vehicles. Size APF 5 monitors were specially developed for use as roof monitors on vehicles. The body of the APF5 is characterized by a very low overall height in relation to the internal diameter of the waterway. This makes it ideally suited as a roof monitor for airfield fire extinguishing vehicles. The monitors are used as water of foam monitors with a throughput capacity of up to 8.000 lpm at 8 bar. The water way is hydraulically optimized flow guide ribs, which leads to low pressure losses and permits large throwing widths. The listed basic model is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made in the listed accessories. The horizontal swivelling range can be increased to up to 360°, depending on the configuration and after prior consultation.

Alco APF 6 size monitors are suitable for use as vehicle monitors, as monitors for industrial applications and for installation on trailers. Due to the different possibilities of operation or drives these monitors can be used almost everywhere. Due to a large selection of nozzles the monitor can be used for water as well as foam dispensing. Size APF 6 models can be used on vehicles and in industrial installations depending on material, operating mode and nozzle. The monitors can be used as a water or foam monitor having a throughput capacity of up to 16.000 lpm at 8 bar. Despite the variety, the essential properties remain the same for all models. For example, ball bearing mounted swivel joints are used exclusively. Worm gears, spindles and gear units are covered and thus impervious to dirt. The listed basic model is shown without nozzle. A corresponding nozzle configuration can be made in the listed accessories. The horizontal swivelling range can be increased to up to 360°, depending on the configuration and after prior consultation.

ALCO APF 8 size monitors are specially designed for use on ships and in industrial plants. The installation on large tankers or trailers enables especially industrial fires to be fought effectively. The APF 8 models are suitable for use on ships in combination with FiFi-2 systems. Size APF 8 monitors are specially designed for use on ships and in industrial installations and industrial fire truck. Electric operated and combined with a remote control this monitor is a perfect choice to throw a huge quantity water on a fire. Size APF 8 monitors can be used as a water or foam monitor with a throughput capacity of up to 40,000 l/min at 8 bar. The APF 8 size models are suitable for use in connection with FiFi-2-systems. The listed basic model is shown without nozzle. A corresponding nozzle configuration can be made in the listed accessories. The horizontal swivelling range can be increased to up to 360°, depending on the configuration and after prior consultation.

Alco APF 3 size monitors are true all-rounders. They show their strengths in the industrial and marine sector as well as in the firefighting sector. Depending on your requirements and design, these monitors are used in portable or fixed versions. A large selection of nozzles and accessories allows maximum flexibility in application. The APC 3-C size captivates by its flexibility both in regards to the drive systems and the pipe/ nozzle equipment. The models of this size can be used as water, foam and powder monitor with a flow rate of up to 4,000 lpm at 8 bar (extinguishing powder 50 kg/s). Due to the compact design of the base body in relation to the water guide inner diameter, they are especially suitable for tight application areas. The listed basic model is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made in the listed accessories.

Alco APF 3 size monitors are true all-rounders. They show their strengths in the industrial and marine sector as well as in the firefighting sector. Depending on your requirements and design, these monitors are used in portable or fixed versions. A large selection of nozzles and accessories allows maximum flexibility in application. The models of size APF 3-U are genuine all-rounders, both in regards to the operating options as well as the equipment with tubes/nozzles. These monitors excel in the especially low overall height of the basic unit relative to the water guide inner diameter and can be used as water, foam and powder monitor with a flow rate of up to 4,000 lpm at 8 bar (extinguishing powder 50 kg/s) depending on equipment. They are equipped with ball bearing mounted swivel joints that can be greased via lubricating nipples. Electric models can be optionally equipped with continuously adjustable limit switches, potentiometers or position sensors. The standard vertical swivelling angle can be adapted to your actual requirements whilst maintaining the entire swivelling range. The listed basic model is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made in the listed accessories.

Alco APF 6 size monitors are suitable for use as vehicle monitors, as monitors for industrial applications and for installation on trailers. Due to the different possibilities of operation or drives these monitors can be used almost everywhere. Due to a large selection of nozzles the monitor can be used for water as well as foam dispensing. Size APF 6 models can be used on vehicles and in industrial installations depending on material, operating mode and nozzle. The monitors can be used as a water or foam monitor having a throughput capacity of up to 16.000 lpm at 8 bar. Despite the variety, the essential properties remain the same for all models. For example, ball bearing mounted swivel joints are used exclusively. Worm gears, spindles and gear units are covered and thus impervious to dirt. The listed basic model is shown without nozzle. A corresponding nozzle configuration can be made in the listed accessories.

Alco APF 2.5 size monitors convince with their compact size and high performance. Whether permanently installed or portable, the size 2.5 monitors offer their users a wide range of tactical options. The large number of accessories and nozzles allow the user the maximum flexibility in the application. Models of size APF 2.5-C are suitable for use as roof monitor on vehicles, as fixed unit in industrial installations or as portable monitor for mobile use. The APF 2.5-C base body excels in very low installation space when in deployment position. It is suitable as water, foam and powder monitor having a flow rate of up to 2,500 lpm at 8 bar (extinguishing powder 25 kg/s). The APF 2.5-C units are equipped with regreasable swivel joints. Simple and ergonomic operation is ensured by an adjustable hand lever. In addition, clamping screws allow monitor interlocking in a certain position. In mobile use, the device can be mounted without tools onto a base support in no time. The monitor can be brought into a stretched position allowing space-saving accommodation in the vehicle. The listed basic model is shown without nozzle. A corresponding nozzle configuration can be made in the listed accessories.

Alco APF 3 size monitors are true all-rounders. They show their strengths in the industrial and marine sector as well as in the firefighting sector. Depending on your requirements and design, these monitors are used in portable or fixed versions. A large selection of nozzles and accessories allows maximum flexibility in application. The APC 3-C size captivates by its flexibility both in regards to the drive systems and the pipe/ nozzle equipment. The models of this size can be used as water, foam and powder monitor with a flow rate of up to 4,000 lpm at 8 bar (extinguishing powder 50 kg/s). Due to the compact design of the base body in relation to the water guide inner diameter, they are especially suitable for tight application areas. The listed basic model is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made in the listed accessories.

Alco monitors in size APF 3 are true all-rounders. They show their strengths in the industrial and marine sectors as well as in the fire service sector. Depending on requirements and design, these monitors are used in the portable version or as a permanently installed variant. A large selection of nozzles and accessories enables maximum flexibility in use. The models in size APF 3U are real all-rounders, both in terms of the types of operation and the pipe/nozzle equipment. These monitors are characterized by the particularly low height of the basic unit in relation to the inner diameter of the water supply and, depending on the equipment, can be used as water, foam and powder monitors with a throughput of up to 4,000 l/min at 8 bar (extinguishing powder 50 kg/s). They are equipped with ball-bearing swivel joints, which can be regreased via grease nipples. An integrated weight compensation ensures that the vertical swivel movement can be operated with minimal effort. The basic model listed is without a nozzle and inlet flange. A corresponding flange and nozzle configuration can be made using the accessories listed.

Alco APF 4 size monitors can be used on vehicles or ships, as well as in industrial plants, due to their versatility. This versatility is also reflected in the accessories. A large selection of drive options and nozzles allows almost any application. Size APF 4-U models are the continuation of the APF 3-U series and thus the all-rounder of size APF 4. This applies for the operation options, the pipe/ nozzle equipment, as well as the specific applications. They can be used on vehicles or ships, as well as in industrial installations, even by remote control from control centres. They excel in particularly low overall height of the basic unit relative to the water guide inner diameter and can be used as a water or foam monitor with a flow rate of up to 6,000 lpm at 8 bar depending on the equipment. They are equipped with ball bearing mounted swivel joints that can be greased via lubricating nipples. The listed basic model is without nozzle and inlet flange. A corresponding flange and nozzle configuration can be made in the listed accessories.

Alco APF 6 size monitors are suitable for use as vehicle monitors, as monitors for industrial applications and for installation on trailers. Due to the different possibilities of operation or drives these monitors can be used almost everywhere. Due to a large selection of nozzles the monitor can be used for water as well as foam dispensing. Size APF 6 models can be used on vehicles and in industrial installations depending on material, operating mode and nozzle. The monitors can be used as a water or foam monitor having a flow rate of up to 16,000 lpm at 8 bar. Despite the variety, the essential properties remain the same for all models. For example, ball bearing mounted swivel joints are used exclusively. Worm gears, spindles and gear units are covered and thus impervious to dirt. The listed basic model is shown without nozzle. A corresponding nozzle configuration can be made in the listed accessories.

Alco APF 8 size monitors are specially designed for use on ships and in industrial plants. The installation on large tankers or trailers enables especially industrial fires to be fought effectively. The APF 8 models are suitable for use on ships in combination with FiFi-2 systems. Size APF 8 monitors are specially designed for use on ships and in industrial installations and industrial fire truck. Electric operated and combined with a remote control this monitor is a perfect choice to throw a huge quantity water on a fire. Size APF 8 monitors can be used as a water or foam monitor with a throughput capacity of up to 40,000 l/min at 8 bar. The APF 8 size models are suitable for use in connection with FiFi-2-systems. The listed basic model is shown without nozzle. A corresponding nozzle configuration can be made in the listed accessories.

Alco APF 2 size monitors are the lightweight members of the ALCO monitor family. The small size combined with compact dimensions allows, depending on the version, a space saving installation or space saving storage. Due to their low weight, they are very flexible in use and allow their user to easily transport them to the site of operation or mount them on weak structural elements. Due to various nozzles and accessories these small monitors allow a wide range of applications. A wide variety of application options makes the proven APF 2-HH an all-rounder. It can be used permanently mounted as a roof monitor or in the portable design for mobile applications. The continuously adjustable hand lever, as well as the simple push-in connection, which connects the basic unit and the base frame are designed for simple handling. Both the basic unit and the base frame can be folded up with one hand for saving space. The APF 2-HH is ready for use with only a short set-up time despite the compact transport position. Special supporting feet on the base frame provide additional stability in use. The listed basic model is without nozzle and input coupling. A corresponding coupling and nozzle configuration can be made in the listed accessories.

Alco monitors in the APF 2 size are the lightweights in the Alco monitor family. The small size, combined with compact dimensions, allows for space-saving installation or storage, depending on the version. Their low weight makes them very flexible to use and enables users to easily transport them to the site or mount them on weak structural elements. A wide range of nozzles and accessories mean that these small monitors can be used in a wide range of applications. The question of whether to use a jet pipe or a monitor has long had an answer: the APF 2 Turbo Fighter, the personal monitor. It is handy, easy for one person to carry, can be set up in a flash, and is therefore the ideal device for mobile use. The APF 2 Turbo Fighter helps you to be ready for action even faster. And all this with minimal use of personnel resources during setup and operation. Both the vertical and horizontal swivel movement can be adjusted continuously. The APF 2 Turbo Fighter has an integrated ball valve for shutting off. It is pleasantly compact and light on the vehicle and in the hand. The feet for support during operation can be folded in for transport, and a lockable transport position for the monitor further minimizes the space required. The basic model shown does not have a nozzle or input coupling. A corresponding coupling and nozzle configuration can be made using the accessories listed.

Multi-purpose nozzles are characterized by the possible change between hollow and spray jet. Depending on the design, it is also possible to adjust the flow rate directly at the nozzle. Special versions of the multi-purpose nozzles allow the simultaneous application of powder and water/foam mixtures. An integrated proportioner allows the direct admixing of foam concentrate at the nozzle on certain models. With a foam attachment they are also suitable for the application of foam. MZ nozzles (multi-purpose nozzles) are equipped with a baffle, which deflects the flow of extinguishing agent at the nozzle outlet so that it comes out through a ring-shaped slit. The resultant full jet is then deflected again at the so-called jet-forming sleeve to be bundled into a compact jet. It has a shorter range than a full jet. However, by pulling back the jet-forming sleeve it is possible to continuously adjust the opening angle of the jet up to a conical spray. A spray jet of this kind can absorb large amounts of energy and heat radiation. Moreover, the fine drops, which make up the spray, are also ideally suited for washing noxious substances out of the air. MZ nozzles create up to triple expansion of type AFFF foam agents without any additional auxiliaries. MZ nozzles with foam attachment can be deployed with all types of foam agents and provide foaming results which are comparable to those achieved with low expansion foam pipes.

Multi-purpose nozzles are characterized by the possible change between hollow and spray jet. Depending on the design, it is also possible to adjust the flow rate directly at the nozzle. Special versions of the multi-purpose nozzles allow the simultaneous application of powder and water/foam mixtures. An integrated proportioner allows the direct admixing of foam concentrate at the nozzle on certain models. With a foam attachment they are also suitable for the application of foam. MZ nozzles (multi-purpose nozzles) are equipped with a baffle, which deflects the flow of extinguishing agent at the nozzle outlet so that it comes out through a ring-shaped slit. The resultant full jet is then deflected again at the so-called jet-forming sleeve to be bundled into a compact jet. It has a shorter range than a full jet. However, by pulling back the jet-forming sleeve it is possible to continuously adjust the opening angle of the jet up to a conical spray. A spray jet of this kind can absorb large amounts of energy and heat radiation. Moreover, the fine drops, which make up the spray, are also ideally suited for washing noxious substances out of the air. MZ nozzles create up to triple expansion of type AFFF foam agents without any additional auxiliaries. MZ nozzles with foam attachment can be deployed with all types of foam agents and provide foaming results which are comparable to those achieved with low expansion foam pipes. The maximum flow rate of the multi-purpose nozzle MZA 4000 is 4,000 l/min and 8 bar pressure. An optimum gap adjustment to the flow rate is achieved by an automatic adjustment to the operating pressure and extinguishing agent quantity.By actuating an electric linear actuator, the stream shape can be infinitely adjusted during operation. (hollow and spray jet).

Multi-purpose nozzles are characterized by the possible change between hollow and spray jet. Depending on the design, it is also possible to adjust the flow rate directly at the nozzle. Special versions of the multi-purpose nozzles allow the simultaneous application of powder and water/foam mixtures. An integrated proportioner allows the direct admixing of foam concentrate at the nozzle on certain models. With a foam attachment they are also suitable for the application of foam. MZ nozzles (multi-purpose nozzles) are equipped with a baffle, which deflects the flow of extinguishing agent at the nozzle outlet so that it comes out through a ring-shaped slit. The resultant full jet is then deflected again at the so-called jet-forming sleeve to be bundled into a compact jet. It has a shorter range than a full jet. However, by pulling back the jet-forming sleeve it is possible to continuously adjust the opening angle of the jet up to a conical spray. A spray jet of this kind can absorb large amounts of energy and heat radiation. Moreover, the fine drops, which make up the spray, are also ideally suited for washing noxious substances out of the air. MZ nozzles create up to triple expansion of type AFFF foam agents without any additional auxiliaries. MZ nozzles with foam attachment can be deployed with all types of foam agents and provide foaming results which are comparable to those achieved with low expansion foam pipes. The MZP 2200-10-DC has a maximum flow rate of 2,200 l /min at 8 bar. By actuating an electric linear actuator, the stream shape can be continuously adjusted during operation. An internal powder nozzle enables the separate or simultaneous discharge of powder and water/foam mixtures.