.png){kind=logo}
BM/BMM jet/spray branch pipes
Jet / Spray Branchpipes are used for the distribution of extinguishing water in full jet or variable spray. The construction is simple, not susceptible to faults and insensitive to dirt. The branchpipe can be easily cleaned by switching the jet shape. The spraying angle can be changed at will by intermediate positions in the spray jet area. To protect fireman when holding the branchpipe against heat and smoke, a water curtain can be added to the full and spray jet. The water curtain element is arranged annularly behind the nozzle. By means of an adjusting ring which can be turned easily, also under pressure, the outlet angle can be varied between 0° and 160°. In moments of danger the entire water flow can be shut-off with a single motion, irrespective of whether the full jet or spray jet had been selected and independently of setting of the water curtain. Not to be used for inside attack. To protect fireman when holding the branchpipe against heat and smoke, a water curtain can be added to the full and spray jet. In moments of danger the entire water flow can be shut-off with a single motion, irrespective of whether the full jet or spray jet had been selected and independently of setting of the water curtain.
Branchpipe holder
Branchpipe holder are for more comfortable handling of branchpipes. Diverts the reaction forces of the water jet through the hose line to the ground. Branchpipe holder can also be coupled in between two hoses, if the hose must be extended across sharp wall edges or window sills.
CAFS tip
The AWG Turbo-CAFS nozzle is suitable for use with the Compressed Air Foam System (CAFS). The air/water foam mixture is transported to the point of application through hoses as usual. In accordance with the fluidic design of the AWG Turbo CAFS nozzle, air bubbles are not destroyed when the jet is discharged. This ensures a bundled jet with a long throwing distance. The AWG Turbo CAFS is opened and closed by a bow handle similar to the AWG Turbo-Nozzle. The coupling connection can also be rotated under pressure.
CM/CMM jet/spray branch pipes
Jet / Spray Branchpipes are used for the distribution of extinguishing water in full jet or variable spray. The construction is simple, not susceptible to faults and insensitive to dirt. The branchpipe can be easily cleaned by switching the jet shape. The spraying angle can be changed at will by intermediate positions in the spray jet area. To protect fireman when holding the branchpipe against heat and smoke, a water curtain can be added to the full and spray jet. The water curtain element is arranged annularly behind the nozzle. By means of an adjusting ring which can be turned easily, also under pressure, the outlet angle can be varied between 0° and 160°. In moments of danger the entire water flow can be shut-off with a single motion, irrespective of whether the full jet or spray jet had been selected and independently of setting of the water curtain. Not to be used for inside attack. To protect fireman when holding the branchpipe against heat and smoke, a water curtain can be added to the full and spray jet. In moments of danger the entire water flow can be shut-off with a single motion, irrespective of whether the full jet or spray jet had been selected and independently of setting of the water curtain.
Turbo-Twist: Switchable foam TIPS
Das AWG Systemstrahlrohr Turbo-Twist bietet für die Ausbringung von Wasser-Schaummittelgemisch, eine passende Lösung. Diese Düse ermöglicht durch die Umschaltung, die Ausbringung sowohl in Form von Mittelschaum als auch in Schwerschaum.
DM jet/spray branch pipe
Jet / Spray Branchpipes are used for the distribution of extinguishing water in full jet or variable spray. The construction is simple, not susceptible to faults and insensitive to dirt. The branchpipe can be easily cleaned by switching the jet shape. The spraying angle can be changed at will by intermediate positions in the spray jet area. To protect fireman when holding the branchpipe against heat and smoke, a water curtain can be added to the full and spray jet. The water curtain element is arranged annularly behind the nozzle. By means of an adjusting ring which can be turned easily, also under pressure, the outlet angle can be varied between 0° and 160°. In moments of danger the entire water flow can be shut-off with a single motion, irrespective of whether the full jet or spray jet had been selected and independently of setting of the water curtain. Not to be used for inside attack. To protect fireman when holding the branchpipe against heat and smoke, a water curtain can be added to the full and spray jet. In moments of danger the entire water flow can be shut-off with a single motion, irrespective of whether the full jet or spray jet had been selected and independently of setting of the water curtain.
Extinguishing lance
For firefighting in rubbish and coal dumps, in stacks of hay and straw, in grain silos and stacked goods which are hard to reach. By targeted and effective supply of the extinguishing water to the smouldering fire nests in the depth, extinguishing is possible within the shortest time.
Extinguishing lance + Impact Hammer for Turbo-Twist
Schwer erreichbare Stellen sind für unser Turbo-Twist System kein Problem - mit der Piercing Düse gelangen Sie ohne Probleme an versteckte Brandherde hinter Türen, in Zwischenböden oder in Containern.
Extinguishing lance 220-140° Turbo-Twist
Schwer erreichbare Stellen sind für unser Turbo-Twist System kein Problem - mit der Piercing Düse gelangen Sie ohne Probleme an versteckte Brandherde hinter Türen, in Zwischenböden oder in Containern.
Flat jet tip 130 lpm Turbo-Twist
The rotating flat jet nozzle of the AWG Turbo-Twist system is ideal for extinguishing or cooling a surface. Furthermore, the rotating flat jet nozzle can be used to shield against flying sparks. Dirty roads are no longer a problem - use the AWG rotating flat jet nozzle for this purpose too. Many other applications are possible.
Foam nozzle Venturi S/M 75 Turbo-Twist
Die Umschaltbare Schaumrohrdüse VENTURI S/M TT, ein selbstansaugendes Schaumrohr mit integriertem 2 l-Schaumbehälter, arbeitet nach dem Venturi-Prinzip und eignet sich für den Erstangriff mit dem Schnellangriffsschlauch bei Fahrzeugbränden. Durch einfaches Drehen des Edelstahlschaumrohres kann kontinuierlich zwischen Mittel- und Schwerschaum umgeschaltet werden. Die Zumischrate kann im Einsatz zwischen 0% - 3% eingestellt werden.
Full jet tip Turbo-Twist
Die Vollstrahldüse des AWG Turbo-Twist-Systemstrahlrohrs lässt keinen Einsatzzweck offen - kommt bei Reinigungs- und Dekontaminationsarbeiten zum Einsatz.
Hammer for Piercing Nozzle Turbo-Twist
Der Schlaghammer dient als Vorarbeit zum Einsatz der Piercingdüse, durch ihn kann man sich im Bedarfsfall mit der Schlagspitze Zugang zu verborgenen Brandherden machen. Mit der Schlagspitze können Löcher bis 40mm Durchmesser und
einer Tiefe von 60mm geschlagen werden.
Turbo-Twist Low expansion foam TIP
Das AWG Systemstrahlrohr Turbo-Twist bietet für die Ausbringung von Wasser-Schaummittelgemisch, eine passende Lösung. Diese Düse wurde speziell für das Ausbringen in Form von Schwerschaum entwickelt.
High-PressurePistol HDP1
The high pressure pistols HDP1 is characterized by the generation of extremely fine droplets as well as an infinitely variable change from spray jet to full jet with an intermediate flat jet position. The internal hydraulic damping device allows an automatic, smooth and pressure shock-free closing.
HS nozzles
The AWG HS jet pipes are characterized by their ease of use and robustness. By turning the switch head, you can switch continuously from shut-off to full jet to spray jet with a spray angle between 0° and 120°. The switch head is made of rubber and chrome-plated brass, the pipe section is made of extremely impact-resistant plastic.
Medium foam tip M0,4 Turbo-Twist
Das AWG Systemstrahlrohr Turbo-Twist bietet für die Ausbringung von Wasser-Schaummittelgemisch, eine passende Lösung. Die Mittelschaumdüse M0,4 ist ein selbstansaugendes Schaumrohr mit integriertem 2 l-Schaumbehälter zur Erzeugung von Mittelschaum.
Turbo-Twist Medium foam tip
Das AWG Systemstrahlrohr Turbo-Twist bietet für die Ausbringung von Wasser-Schaummittelgemisch, eine passende Lösung. Diese Düse wurde speziell für das Ausbringen in Form von Mittelschaum entwickelt.
Pistol nozzle C-SA
Pistol nozzles C-SA are optimally suited for use with quick attack hose reels. A control facility at the water outlet allows switching from full jet to 90° spray jet at flow rates of 75l/min to 115l/min at 5bar.
Turbo-CAFS D25
The AWG Turbo-CAFS nozzle is suitable for use with the Compressed Air Foam System (CAFS). The air/water foam mixture is transported to the point of application through hoses as usual. In accordance with the fluidic design of the AWG Turbo CAFS nozzle, air bubbles are not destroyed when the jet is discharged. This ensures a bundled jet with a long throwing distance. The AWG Turbo CAFS is opened and closed by a bow handle similar to the AWG Turbo-Nozzle. The coupling connection can also be rotated under pressure.
Turbo-Pistol 2130 HD
The Turbo-Pistol of type 2130 HD is the combination of the advantages of the Turbo nozzles and the Turbo pistols, even when used with high pressure. The flow rate is adjustable depending on the inlet pressure. The change between full jet and spray jet is done analogous to the AWG Turbo-Nozzles by turning the nozzle-head/bumper. The AWG Turbo-Pistol 2130 HD has a union nut at the inlet that can also be turned under pressure. It can preferably be used in connection with hoses DN 19-25-33.
Turbo-Twist Adapter
The Turbo-Twist adapters allow the use of existing jet & foam nozzles in combination with the Turbo-Twist shut-off device.
Turbo-Twist shut-off unit
The shut-off unit is the centerpiece of the Turbo-Twist system. The Turbo-Twist Shut-off unit base module with a rotatable coupling at the inlet and the new Turbo-Twist interface at the outlet for locking securely in the springloaded and self-locking bayonet connecting on the interchangeable attachments. No unintended opening under pressure possible. Easy to fit and lock for a secure connection in just seconds. And just as easily disconnected by pressing together - for changing nozzles at turbo-speed.
Turbo-Twist Turbo nozzle tip
The reliable features of the Turbo nozzles remain the same for the type Turbo-Twist hollow stream nozzles: open and close with a u-shaped handle, adjustment of the stream form full jet (0°) to spray jet (120°) by turning the head of the nozzle. A good aid to feel the selected stream even at poor visibility is the pointer.